To clean AirPods, you’ll require a lint-free cloth, some alcohol and water, and a fine-edged medium like a toothpick to fork out earwax.
Cleansing your AirPods can benefit them sound better, as well as decrease the quantity of germs you’re encountering each day.
When cleaning your AirPods and their case, avoid getting water or alcohol inside the articles.
AirPods are presumably the most attractive earbuds on the run right now, notably for iPhone users. But like all earbuds – and all accessories – over time, they get messy and will necessitate being cleaned.
Not only do AirPods get plugged up with earwax, but there’s also the dirt they collect when they’re lost under the auto seat. And of course, anything that you go through each day will load up with germs and grease anyhow.
Fortunately, cleansing your AirPods and their case is straightforward.
To clean the AirPods and their case, you’ll require at least one lint-free cloth, few drops of water, and a fine-edged medium like a toothpick or pin. If there are dirty spots that won’t get out, you might also require a little bit of rubbing alcohol.
How to clean your AirPods
The Earbuds
To wipe the earbuds, you’ll require a soft lint-free cloth and a device with a good end.
For the cloth, it is recommended to buy a “microfiber” cloth. The fine-edged medium can be a dental floss stick, bobby pin, toothpick, needle, or any other household article – if you don’t need to use something sharp, a cotton swab serves too.
1. Clean the surface of the earbuds with the lint-free cloth, gently dampened with water.
2. Apply another dry lint-free cloth to wipe the earbuds, avoid making liquid in any open ends.
3. To tackle earwax that’s held in the earbuds’ speaker hole, seize your dry cotton swab or fine-edged tool. Meticulously dig out the earwax, ensuring to focus around the ends of the speaker. If you’re utilizing a sharp object, be aware not to cut yourself or penetrate the speaker.
Wax gathers efficiently around the ends of the speaker.
If you own AirPods Pro, you’ll also need to clean the silicone tips covering each earbud’s speaker.
1. Lift the silicone tips that cover your AirPods Pro earbuds and wash them in water. Don’t put soap or any other household cleanser.
2. Rub them dry with a soft, lint-free cloth, making sure they’re dehydrated.
3. Reattach them to the AirPods once they’re dry.
4. To remove the tips of an AirPod Pro, pull firmly from the base of the end. It is the spot where it’s attached to the earbud.
To reattach it, adjust the tip with the oval-shaped connectors on the earbud’s speakers and firmly push it in. It may need some tries, but once you’ve aligned the connectors, it should connect easily with a click.
You’ll require to invert the earbud tip when you put it back on.
How to clean your AirPods
The Case
Before you wash the AirPods’ case, eliminate the AirPods from the case.
1. Utilize a dry lint-free cloth to clean the outside of the case. You can dampen the fabric a bit with alcohol for more challenging spots, but be sure to dry the areas afterward. Also, ensure not to get any dampness inside the case’s AirPod racks or in the charging port.
2. Use a soft bristle brush to eliminate debris from the charging port. You don’t need to pierce the charging port or make it wet.
3. Use a soft bristle brush or a soft toothbrush to clean the inside of the case – the bristles will help dig dirt out of the recesses and crannies inside the case.
Wrap Up
So, after going through how to clean AirPods, you must follow them accurately to get clean and dirt-free air pods.