No Device Drivers Were Found – While installing a different Windows version on your computer, you may encounter such an error message. You submit this error due to the partition’s wrong format where you want to install the OS. Follow specific steps to format the drive in NTFS and resolve the issue-
If you have inserted installation means from a USB port on your PC, attempt to re-plug to a USB 2.0 port. This process has served many users, and this operates for them.
How to resolve ‘No device drivers were found’ while installing Windows – Follow these steps to resolve the issue-
To try this solve on your device, you will require Windows 10 DVD from which you had installed the Windows 10 on your computer. If you don’t have one, you have to generate a bootable installation tool from another computer.
Fix 1 : No Device Drivers Were Found
As your processor boots from the Windows 10 installation media, follow the subsequent steps-
- Notice Windows 10 installation system booting in.
- Click on “Next” to proceed further.
- Tap on “Repair your computer” on the bottom left corner of the Recovery Environment.
- Next, click on “Advanced options “.
- Put account password and tap on “Continue “.
- Copy-paste these two commands one-by-one in Command Prompt window, and hit Enter to execute both of the authorities sequentially on your computer.
- list disk
- To choose the disk and clean it up, execute these commands.
- Select disk your disk no.
- Replace the “with the number beside the drive where you want to install the OS.
- For this computer, it is “Disk 0 “. So the command will be like this-
- select disk 0
- Copy-paste this command to create a new primary partition, and hit Enter.
- create partition primary
- Same way copy-paste this command to quick-format the new partition, and then hit Enter.
- format fs=ntfs quick
- Close Command Prompt window.
- Choose an option window, tap on “Turn off your PC.”
- Start computer and install the OS in the new partition.
Fix 2 – Install the driver from USB
If the previous method didn’t work out, you could install the drivers from a USB drive.
- STEP 1
- Just download the latest SATA or AHCI driver from the manufacturer’s website.
- Plug in a USB drive to your system.
- Copy the downloaded driver file from your computer to the USB drive.
- Unplug it from your system.
- You will need a bootable USB installation media for the different installation process. Don’t you have one? Create a bootable installation media.
- STEP 2
- Put the installation media on your computer.
- Once the ‘No device drivers were found’ message emerges on your screen, plug the USB drive containing the drivers.
- After that, tap on “Load driver” or “Browse” to browse for the drivers.
- Then, install the drivers on the computer. This trick should solve the problem.
Fix 3 – Use another USB port.
You can use another USB port to install the device driver.
- During the installation method, when the installer asks for a driver tap on “Cancel“.
- You will appear on the Welcome screen. Now, insert the USB drive to a various port than the usual one.
- Finally, tap on “Install” to start the installation process.
This workaround has helped out a lot of people. Your problem should be resolved.