Mouse freezes in Windows 10. The problem with mouse arrow lagging or freezing while working Windows is known, and while Microsoft has done trying to enhance upon it with concurrent updates, it didn’t ease much.
The cause could be errors with the mouse tools, the USB port, or the system’s software. We would troubleshoot the problem subsequently to isolate every possibility one by one. Some users informed that when they changed the battery, the situation got fixed.
Try the following proposed recommendations sequentially:
Mouse lag is a significant problem affecting multiple Windows 10 PC users while using it for job or Gaming. Here are Fixes for the difficulty. Before attempting fixes given, you can judge the Workarounds–
- If you are practising a Logitech mouse, uninstall Logitech Options software from the machine.
- Work to laptop’s trackpad holding Fn + F11 keys together. Several laptop manufacturers produce a different key combination for incapacitating trackpad.
- Plugin the mouse pointer to some other USB port of the computer.
- Unplug the mouse from your computer, wait for a while and then plug it in again.
- Check if your mouse is working by plugging it to another computer. If your mouse is working fine on another computer, then go for these fixes.
- Reboot the computer to preserve the changes on the computer.
If specific workarounds didn’t act out for you, go for particular fixes-
Fix 1 Mouse Freezes Windows 10
- Tap Windows key + I together to Open Settings.
- Tap on Devices
- Select Mouse from Left Menu.
- Now, Turn off and repeat Turn on the option “Scroll Inactive Windows when I Hover Over them“. Do it a few occasions.
Your difficulty will get fixed. If it Doesn’t, Roll on to next fix.
Fix 2 Mouse Freezes Windows 10
- Move to Settings
- Continue to Devices.
- Pick Mouse from the left menu.
- Select Additional Mouse Options
- Take the Pointer Options Tab.
- Uncheck Enhance Pointer Precision
- Review Display Pointer Trails.
- Select Ok and Exit.
Fix 3 – Uninstall Mouse Drivers
- Locate Device Manager in Search
- In the device manager, tap and expand Mice and Other Pointing Devices.
- Right-tap and Uninstall Your Mouse Driver.
- Tap on Action and Select Scan for Hardware Changes. Windows will automatically install the best workable drivers.
Fix 4 Disable Fast Startup
Turning Fast Startup ‘off’ on the computer may resolve this issue.
- Hold Windows key+R to launch Run window. Copy-paste the run command and hit Enter to perform it. Power Options window will be opened. powercfg.cpl
- In the Power Options window, on the left-hand side, tap on “Choose what power buttons do“.
- In System settings, click on “Change settings that are currently unavailable“.
- Now, following ‘Shutdown settings‘ uncheck the choice “Turn on fast startup (recommended)“.
- Finally, tap on “Save changes” to save the changes on your computer.
Close System Settings on the computer.
Restart the computer to keep the changes. After rebooting, the mouse should go fine.
Fix 5 Adjust Power Management
Windows stop any unnecessary driver from saving power consumption. Seldom this causes the lag problem with the mouse drives.
- Tap Windows key+R to launch the Run window on your computer. In Run window, type “devmgmt.msc” and then hit Enter to start Device Manager window on the computer.
- In Device Manager window, scroll down and open “Universal Serial Bus controllers “.
- Double tap on “USB Root Hub (USB 3.0)” to open its properties.
- In USB Root Hub (USB 3.0) Properties window, ensure the option “Allow the computer to turn off this device to save power” is unchecked.
- Then, tap on “OK” to save the computer’s changes—close Device Manager window. Reboot the computer to save the changes. After rebooting the computer, the mouse should be working fine.
This should solve your problem.
Fix 6 Switch mouse frequency
If you use a mouse software on the computer like Logitech options, try modifying mouse frequency in that software. Modify its frequency to a lower value like 250Hz.
Fix 7 Disable USB Selective delay settings
- Examine the power plan in Windows 10 search box.
- Tap on change advanced power settings.
- Double-tap on USB settings to expand it.
- Double-tap on USB Selective suspend settings to acquire it also.
- Choose disabled from the dropdown.
If it says on battery and Plugged in, disable for both of them.
Fix 8 Try to keep your router a little away from the PC and Bluetooth mouse.
If your router is saved on your Computer table, try to retain it a little bit away, so that its powerful WIFI signals do not conflict between Bluetooth mouse and Computer interface.
Fix 9 Update drivers
- Press Windows key + R key together to open Run.
- Type devmgmt.msc in it and tap on OK.
- Double-tap on Firmware to expand it.
- Right-tap on system firmware and select update.
- Tap on Search automatically for renewed driver software.
- Furthermore, right-click and refresh your Intel display driver.
Fix 10 Clear mouse pad or mouse surface area
Most users don’t accurately need a mouse pad that isn’t necessary for an optical mouse, but it matters if the surface beneath it isn’t straight, glossy, or has dust on it. Review the same and ensure the mouse is placed on a dry, clean, covered, and non-glossy surface.
Fix 11 Adjust the USB ports (For example USB 2.0)
The USB port the mouse is attached to could get loosened with time. In such a situation, the pointer would lag or even freeze. To separate the issue, try ticking the USB mouse to various slots.
Try attaching the mouse to USB2.o port on the PC.
Fix 12 Replace the mouse
In case the problem is with the external mouse, attempt replacing it with an extra one, unmistakably if available. If the other mouse works fine, we would have to substitute the troublesome mouse forever.
Fix 13 Use default mouse settings
- Tap on the Start button and on the gear-like symbol to open the Settings menu.
- Go to Devices and the Mouse tab on the left-hand side.
- Tap on Additional mouse alternatives.
- In the Device settings window, tap on Settings.
- Tap on Defaults to restore the settings to Default.
- Tick on Apply and OK.
Fix 14 Check USB root hub
The system might be installed to keep switching OFF the Mouse to save power. Here’s the scheme to recognise and improve it:
- Click Win + R to open the Run window. Type devmgmt.msc and tap Enter to open the Device Manager.
- Get the Universal serial bus controllers drivers in the list and expand the segment.
- In the list, locate USB Root Hub and right-tap on it. Select Properties.
- Continue to the Power Management tab and untick “Allow the computer to turn off this device to save power.”
- Tick on OK to save the settings and restart the system.
Wish it serves!