Miracast Available with HDCP and Fix if it Stops Working
Miracast Available with HDCP technology has evolved a long way. Earlier, we practised to attach our devices using cables, but now, many devices can be connected wirelessly. One such wireless technology is Miracast. Using Miracast, you can join your computer’s screen to a TV screen, projector and media players.
This is HDMI over Wi-Fi. The other device needs to be a Miracast compatible device to join the devices, that’s it. This technology has enhanced very usefully in the prior few years. People use it to present slide shows, play games, and watch movies on the large TV screen.
You can do the same. You might have this technology previously on the computer, and you might not know it. But, if your computer’s a few old or this tech did not come preinstalled on the system, there is another way to fix it. How? We will show you where to set up Miracast, adjacent with what to do if it stops working.
Check Your Computer for Miracast Support
Before commencing with the setup, you need to verify if your system maintains Miracast or not. Understand the steps to locate it.
- Step 1. Right-tap on the Start menu button and choose Run.
- Step 2. Type dxdiag and tap on OK.
- Step 3. The last step will begin the DirectX Diagnostic Tool. Here, click on Save All Information.
- Step 4. Choose the location where you want to save the file and tap Save.
- Step 5. Move to the location wherever you saved the file in the last step and open it.
If the status says “Available, with HDCP”, it indicates your computer is Miracast agreeable. But, what if the status doesn’t say Available? If it says so, it implies your device is not Miracast fit.
How to Setup Miracast in Windows 10
After ensuring your computer sustains Miracast, we will now begin the settings of Miracast. Comprehend the steps to do so.
Step 1. Right-tap on the Start button and select Settings.
Step 2. Tap on Devices.
Step 3. Under Bluetooth and some devices, check out to Add a device.
Step 4. Choose Wireless display or dock.
Step 5. Here, look for your device and tap on it to connect. The device must be turned on to join, so ensure it’s ON. When the device is attached, you can configure the displays by holding Windows Key + P.
How to Fix Miracast not working on Windows 10
If you is the users who did not possess the Miracast Status as Available, there’s no necessity to worry. You can still utilise Miracast on the computer to project display wirelessly.
There can any of the two reasons following this problem:
1. Did you Upgrade your Computer to Windows 10?
Is the Windows 10 installed on your computer is an upgrade from Windows 8 or other former OS? If yes, that implies Windows 10 on your device might not have the inbuilt Miracast support. If you need to use the Miracast technology on the device, you will have to purchase a Miracast Adapter. Miracast Adapters are readily available in the store.
2. Your Computer had Windows 10 pre-installed?
If your computer arrived with Windows 10 pre-installed, then you should have no difficulties working with Miracast. The problem is presumably due to outmoded Wi-Fi or Display Adapter’s drivers. Update the drivers, and you will be clear of this problem. You can refresh the drivers from your device manufacturer’s website.