When Nothing Works How To Unclog Toilet

How to unclog a toilet when nothing works? For this reason, you might have tried several methods to unclog the toilet.

Does the toilet water lead to overflow almost to the top of the bowl after flushing? Well, if you’re holding this problem, you should understand that your toilet might have been sealed up.

How To Unclog Toilet When Nothing Works

Handling a clogged toilet is frustrating as well as can be embarrassing. For this reason, here are a few treatments put together the best possible tips to unclog the toilet when nothing works.

Dish Soap And Hot Water: Boil a gallon of water, and then leave it to cool a little bit. Put a few bits of dish soap into the toilet basin. Afterward, pour the warm water smoothly into the toilet bowl and forget it for some minutes before flushing. The blend of the soap and warm water will release the clog, thus pushing it in the process.

Use Wet/Dry Cleaner: Wear rubber gloves and vacuum to engulf out the water thoroughly. The reason is to provide a vacuum to eliminate any debris that is obstructing the toilet faster. After draining the bowl, put the vacuum tube into the bathroom and gently push it into the sewer. Next, tie an old rag around the hose and make a few bits into the hole to produce a suction effect. Then turn on the vacuum to enable it to suck out the clog from the toilet. Finally, flush the toilet and observe if the water flows quickly.

How To Unclog Toilet When Nothing Works

Trying Plunger: Plunger stands as a great tool you can use to unclog a toilet. Before using the plunger:

  1. Put on rubber gloves to prevent the toilet water from splashing or touching your hands.
  2. Hold the plunger at the handle, insert the rubber part into the toilet bowl, push down the plunger slowly, and add more power.
  3. Rush it in several times to produce a tighter vacuum, and then drag it out quickly.

It will help loosen the clog and push everything down the toilet drain.

Mixture Of Baking Soda And Vinegar: A combination of vinegar and baking soda is present mainly in the kitchen. Pour 2 cups of water and one soda cup into a container. Stir thoroughly, and then pour the mixture into the toilet bowl. Next, pour two cups of vinegar into the toilet and wait for several minutes or even hours—notice globules from the bowl when you combine vinegar due to the blend of the substances. The baking soda and vinegar reaction will help loosen the materials blocking the toilet, thus allowing the water to flow freely.

Apply An Enzyme Product: Enzyme waste elimination product also goes excellent when employed to unclog a toilet. This enzyme waste removal is mainly used in a septic system to disperse waste. The best part is that it doesn’t hurt your pipes and your health as well. First, study the guide on the product description to understand the suggested amount to pour into the duct. Next, pour the required amount of the enzyme as instructed into the bowl. Then wait for a few moments to soften the clog, and allow the toilet to drain.

Plumbing Snake: A plumbing snake, commonly known as “Closet Auger,” is a flexible wire used to clean the toilet to reach deep down the duct. It holds a rubber coating to better protect the porcelain from scratches and bruises when pushing it into the bathroom. With the gloves on, set one end of the snake tool into the toilet basin. Gently push it down and twist the handle clockwise to allow the snake to push the obstruction into the toilet drain. If water flows quicker, this indicates the clogs are not there anymore, but otherwise, you should undertake the process one more time.

Work Chemical Drain Cleaner: If the toilet is still clogged, consider using a drain cleaner. This cleaner operates great to dissolve any solids clogging the toilet. Nevertheless, they include toxic substances that can harm human health, pets, and drain pipes. Hence, use this process as the last alternative if the methods mentioned above do not work. First, pour the needed amount into the toilet, as declared by the company. Wait for 5-10 moments, and then flush the toilet to throw down the barrier.

Contact a Plumber: If you have worked all the tips to unclog a toilet and still fail, you have to call a plumber. Sometimes your bathroom might need to be obliterated to solve this puzzle. Since you might not have the instruments to carry out such a project, contacting a plumber will find ideal. The plumber will have to review and work on the toilet to push the material clogging the toilet. Some might go as far as providing you with tips to prevent such problems.

Wrap Up

Flushing toilets can be a tremendous obstacle when it gets jammed. Luckily, with the given tips to unclog the toilet when nothing works, you can immediately get your system back to regular and experience a better flush. The most satisfying part is that the tools required to do do-it-yourself are readily obtainable in your home. However, if you don’t own them, head to any home improvement store to get them at an affordable cost.