Congratulations! On purchasing a GE-marked Universal Remote, you have purchased technical convenience. This universal remote can function upon many sound/video gadgets, including Televisions, Blu-ray/DVD players, streaming media players, soundbars, link beneficiaries, and many more! Let’s get started! We shall cover the three sections listed here in an instant!
- Set up Instruction for GE Remote GE remote programming
- Codes and Universal Remote Codes for GE remote
Set-Up Instruction for GE Remote
Getting started, the GE universal remote requires two AAA batteries (excluded). Soluble batteries are suggested. So here’s how to carry out the battery installation.
On the backside of the remote, pull down on the finished surface and slide battery cover descending to eliminate.
Then, match the (+) and (- ) marks on the batteries to the (+) and (- ) symbols inside the battery compartment; at that point, embed two AAA batteries. Make sure to utilize new batteries.
The next step would be to position the battery cover marginally underneath the opening and drive upward to secure the setup. Remember that if your GE remote quits working appropriately, supplant the batteries with new ones.
Battery Precautions for GE Universal Remote
These are important to note. Do not mix one old and one new battery. It might spoil the remote’s setup. Secondly, do not blend soluble, standard (carbon-zinc), battery-powered (Ni-Cd, Ni-MH, and so on) batteries. Always dispose of frail or destroyed batteries expeditiously and reuse or discard them in agreement with nearby and public guidelines. Your remote naturally stops if the catches are discouraged over 8 seconds. This will save your batteries should your universal remote stall out in a spot where the pitfalls stay prevented (e.g., between the couch pads).
GE Universal Remote Codes Saver
You have as long as 10 minutes to change the batteries in your GE remote without losing the remote codes you have customized.
GE Universal Remote Codes and Programming
How to Program any GE Universal Remote Control
Follow the step-by-step directions listed here to set up your GE remote control to work with any audio or video components.
When using the universal remote codes listed below, you will have to program the remote to function with your TV or device. Find details for how to program your remote to work with your device or TV
Firstly, remove the battery cover and batteries from the GE Universal Remote Control. Look for a sticker that tells you the model number of the remote control. Identify the version number indicated by “V2,” “V3,” or “V4.” If no V-number is listed, then assume it is version 1. Download the universal remote codes list for your specific version from the list given herewith and find the exact remote code suitable for your device. Turn on the device you are programming into the GE Universal Remote. Press down the “Setup” button for 5 seconds until the red indicator light turns on. Press the device button, such as “TV,” “DVD,” or “AUX.” Enter the 2 or 3 or 4 digits universal remote code. Once you enter a valid code amongst the universal remote codes for GE remote, the light turns off. Press the “Power” button to test to see if it worked. If not, keep repeating the steps until you find a remote code capable of working on your GE universal remote.
When utilizing the universal remote codes listed here, you must program the remote to be used with your TV or gadget. Discover subtleties for how to program your GE universal remote to work with your device or TV herewith.
Setup Instructions and Universal Remote Codes for GE Remote
The most common 2, 3, and 4 digit ge universal remote codes can be found from the following list.
2 Digit GE Universal Remote Codes
Audio Dynamic 14,37,12,35
Bell & Howell 30,43,28,41,19,09,38
Curtis Mathis 03,19,23,16,20
General Electric GE 02,18,03,07,06,10,15,60,61,68,62,63
JC Penney 03,02,30,07,26,05,04,28
LXI (Sears) 02,03,11,25,19,12,04,07,08,10,22,16
Radio Shack 02,12,24,23,11,21,20
RCA Proscan 02,03,04,05,06,07,08,10,21,22,23,24,25,67,68,69,44,45,53
3 Digit GE Universal Remote Codes
4 Digit GE Universal Remote Codes
ACME 0008 0050
ADC 0002 0006
ADMIRAL 0020 0226 0001
ADVENT 0176 0922
AIWA 0195 0196 0227 0269
AKAI 0105 0002 0077 0254
ANAM NATIONAL 0053 0003 0025 0042 0193
AOC 0004 0005 0009 0014 0156 0175 0187