A lot of homeowners are shifting to an eco-friendly type of flushing toilet for their bathrooms not because it is trending. But it is because we have to conserve energy and save Mother Earth. We are all aware that we are now facing various environmental issues like climate change and if we will just ignore this, then it will greatly affect our lifestyle. As human beings, we have to be responsible for this, so we should sustain our homes with environment-friendly elements and we can start by installing an eco-friendly and low flushing toilet.
Some of you might be thinking that to install this would be expensive, but you will, later on, realize that the best flushing toilet of this type will also benefit you and your family. This is not only about changing your old flushing toilets. Let’s say that you just need to care about your usage because you are consuming water here. How much water do you need to flush away the waste after use? Is a single flush enough to completely remove the debris and odor in this small room?
Keep in mind that we are wasting too much water here and that is one thing that most of us ignore. I guess it’s time to also think about how we can reduce consumption because sooner or later we might run out of water. Why don’t we consider installing a low and dual flushing toilet that is designed to be eco-friendly? If you would like to minimize your water bills or would like to start saving money and the environment, then learn how this can be.
Dual Flush Toilets
When it comes to a dual flushing toilet, there would be two featured functions. You will notice those buttons on the tank.
The first function is for one button to provide half of the tank flushing system. The second function is for the other button to use the full-tank flushing system.
These buttons will give you two options that can help you conserve water so you do not need to always use the whole tank of water that usually contains 6.9 gallons.
Amount of Water
Since you are aiming at a low flushing type of toilet, you will have options. The tanks that are usually available may store 3-6 liters, 4.5-4.8 liters, and 6 liters of water.
Using a dual flushing toilet, you may use 3 liters of water for short flushing of waste. While for long flushing, you will be consuming 4-6 liters of water.
Imagine using an old type of toilet at home that is not specifically designed as an eco-friendly toilet. With this one, you will consume 13 liters of water every time you flush waste. Can you see how much water you can save or waste per flush?
Number of Pieces
Most energy-efficient toilets are usually designed with a single or two pieces per unit. You may find a one-piece flushing toilet expensive more than a two-piece. The good point here is the ease of installation.
Both types of flushing toilets are effective. However, it would still be ideal to consult a plumber before installing one.
Type of Flushing
The first option is gravity-fed where the water is usually going down into your tank. And then, the bowl will push down wastes. This might be cheaper, but cannot be reliable when it comes to handling huge amounts of wastes.
While the pressure-assisted type has more power, so it is capable of handling huge amounts of wastes. Here you do not need to flush twice so less water is consumed. Thus, saving more water due to a great flushing system. The downside is that it is more expensive and can produce more noise.
Flushing performance
When choosing a flushing toilet, you have to consider the rating and make sure that it complies with the water efficiency schemes. A low and dual-flushing toilet usually complied and rated for efficiency. The reason why a low flush toilet consumes less water is because of the integrated hand basin installed in its flushing system.
However, the experts have already started researching and developing an air-assisted type of toilet. This can only consume water amounting to 1.5 liters per flush. If this would be made available, then it would be more ideal and eco-friendly.